Cat Marka Jalan Termoplastik dengan 10% Manik Kaca Pracampur
Material marka jalan termoplastik yang dipracampur dengan 10% manik kaca reflektif — reflektivitas tinggi, daya lekat kuat, dan masa pakai marka yang panjang. Kadar pracampur 10% secara nyata meningkatkan kecerahan garis pada malam hari dan kondisi minim cahaya lainnya, serta banyak digunakan di jalan perkotaan, area parkir, dan jalan tingkat kecamatan.
- NAMA PRODUKCat marka jalan termoplastik
- KEMASAN25 kg / karung
- KOMPOSISI UTAMA10% manik kaca pracampur
- DIKENAL JUGA SEBAGAICat marka jalan leleh panas · cat garis jalan aplikasi panas · kompon marka perkerasan termoplastik
- TEMPAT ASALGuangxi, Tiongkok
- APLIKASILeleh panas (dilelehkan dan diaplikasikan di lokasi)
- BENTUKSerbuk
- WAKTU KERINGRata-rata 2–5 menit
Cat Marka Jalan Termoplastik dengan 10% Manik Kaca Pracampur
Manik pracampur menjadi cadangan reflektivitas yang tersingkap seiring keausan garis; manik tabur yang diaplikasikan saat konstruksi memberikan pembacaan awal. Persentase pracampur yang tepat mengikuti kebutuhan tender atau anggaran Anda — berikut perbandingan kedua grade dan tuntutan standar utama.
How the two grades compare
| 10% mixed beads | 20% mixed beads | |
|---|---|---|
| Premix loading | 10% of the material | 20% of the material |
| Reflectivity reserve over the service life | Lighter — suits shorter renewal cycles | Larger — suits long-life highway lines |
| Initial retroreflectivity | Set by the drop-on beads and spread rate in both grades | |
| Cost per tonne | Lower — less glass in the batch | Higher, with more reflectivity in reserve |
| Typical fit | Urban streets, car parks, township roads | BS 3262 reflectorized tenders (≥ 20%), high-traffic roads |
Not sure which your project needs? Read the tender’s premix clause first — if it names BS 3262 reflectorized material, 20% is the threshold; if it sets its own percentage, we formulate to that number exactly — 10%, 20%, or any premix percentage you need.
What the standards expect of premix beads
| Standard | Premix bead requirement |
|---|---|
| BS 3262-1:1989 | ≥ 20% when the line must reflectorize — for those tenders, pick the 20% grade |
| BS 6088 Class A (premix beads) | 65 – 95% retained on a 425 µm sieve, ≥ 70% true spheres, refractive index ≥ 1.50 |
| AASHTO M 249-12 (2024) | 30 – 40% uncoated M 247 Type I — a separate product grade |
| EN framework | Premix beads via EN 1424; on-road performance by EN 1436 RL classes |
What is in the bag
Thermoplastic binder, titanium-dioxide pigment, and calcium-carbonate and quartz filler ground in our own plant behind the coating lines — no outsourced filler, no trader margin — with 10% glass beads blended evenly through the batch. White and yellow, screed, spray or extrusion grades, formulation tuned to the standard your tender names.
Dari Lini Kami ke Pelabuhan Anda
- Karung anyaman PP netto 25 kg — dicetak dengan merek PZTRAFFIC atau merek Anda sendiri: pencetakan karung OEM dipersilakan.
- Pengantongan otomatis dan penyusunan palet robotik pada lini termoplastik di fasilitas Hezhou kami.
- Setiap batch lolos laboratorium internal sebelum ditumpuk untuk pemuatan.
- Dikirim dari Pelabuhan Qinzhou — Asia Tenggara dalam 5–15 hari, Afrika dan Amerika rata-rata ~30 hari. Ketentuan perdagangan EXW / FOB / CIF.
- Dokumentasi FORM E / ACFTA tersedia bagi pembeli ASEAN.
Dipasangkan Dengan
Pertanyaan Pembelian
Q-01Can you formulate other loadings than 10% and 20%?
Yes — the percentage is not a fixed parameter and can be adjusted. Contact us and tell us what you need.
Q-02Can you provide samples?
Yes — free samples of 1–2 kg for any product. Whatever you pay for the sample and its freight is credited in full against your next purchase. Email info@pztraffic.com with the products and standards you need.
Q-03Which trade terms do you support?
We can provide EXW, FOB, CIF services, etc.
Dapatkan Penawaran Harga dalam 24 Jam
Silakan isi formulir di bawah ini dan kami akan menghubungi Anda.
