Cat Marka Jalan Termoplastik BS 3262
Material marka termoplastik aplikasi panas yang diproduksi dalam kerangka formulasi BS 3262 — standar yang paling sering dirujuk dalam tender berpengaruh Inggris di Afrika, Timur Tengah, dan Asia Tenggara. Tersedia putih dan kuning, disetel klausul demi klausul sesuai tender Anda, lengkap dengan lembar data dan sampel gratis sebelum Anda berkomitmen.
- NAMA PRODUKCat marka jalan termoplastik
- KEMASAN25 kg / karung
- KOMPOSISI UTAMAManik kaca ≥ 20% · 10% TiO₂ (putih) · pengikat resin minyak bumi C5 ≥ 18%
- DIKENAL JUGA SEBAGAICat marka jalan leleh panas · cat garis jalan aplikasi panas · kompon marka perkerasan termoplastik
- TEMPAT ASALGuangxi, Tiongkok
- APLIKASILeleh panas (dilelehkan dan diaplikasikan di lokasi)
- BENTUKSerbuk
- WAKTU KERINGRata-rata 2–5 menit
Persyaratan BS 3262
BS 3262 terdiri dari tiga bagian, dua di antaranya ditarik pada tahun 2000 — proyek modern umumnya menggabungkan kerangka formulasinya dengan klausul kinerja EN, dan kami memformulasikan material untuk keduanya. Tabel di bawah mengutip persyaratan dari teks aslinya.
Formulation — BS 3262-1:1989
| Composition (% of total mixture) | Requirement |
|---|---|
| Binder (resin + oil) | 20 ± 2% |
| Premixed solid glass beads (when reflectorized) | ≥ 20% |
| Aggregate + pigment + filler + premix beads, combined | 80 ± 2% |
The premix beads sit inside the 80 ± 2% total. White pigment must be anatase or rutile titanium dioxide to BS 1851 — the standard fixes the type, not a minimum content. The combined solids must pass a 2.80 mm sieve completely, with 65–95% passing 600 µm.
Finished-material requirements
| Property | White | Yellow |
|---|---|---|
| Softening point | ≥ 65°C | ≥ 65°C |
| Luminance factor, as manufactured | ≥ 70 | ≥ 50 |
| Luminance factor, remelted on site | ≥ 65 | ≥ 45 |
| Luminance factor after heat-stability test | ≥ 65 | ≥ 45 |
| Flow resistance (mean slump) | ≤ 25% | ≤ 25% |
| Laboratory skid resistance (pendulum) | ≥ 45 | ≥ 45 |
The heat-stability test stirs the material for six hours at 200°C or the declared maximum application temperature, whichever is lower. Luminance factor is a daytime whiteness figure — it is not the night-time retroreflectivity (RL) of EN 1436; if your tender sets an RL target, specify it separately and we formulate for it.
Application — BS 3262-3, still in force
| Binder system | Method | Thickness (excl. drop-on beads) |
|---|---|---|
| Synthetic resin | Screed | 2.0 – 5.0 mm |
| Spray (except yellow edge lines) | ≥ 1.5 mm | |
| Extrusion | 2.5 – 3.5 mm | |
| Gum / wood rosin | Screed | 3.0 – 5.0 mm |
| Spray (except yellow edge lines) | ≥ 2.0 mm | |
| Extrusion | 4.0 – 5.0 mm |
Lay on a dry surface above 5°C; concrete and polished-aggregate asphalt need a compatible primer. Line width tolerance is +10% / −5% of the specified width.
Apa yang sebenarnya diwajibkan BS 3262 — dan apa yang tidak
TUJUH KLAUSUL YANG UMUM DALAM TENDER TIDAK TERDAPAT DALAM TEKS STANDAR. TEKNISI KAMI MENGURAIKAN TEKS ASLINYA, TABEL DEMI TABEL.
Dari Lini Kami ke Pelabuhan Anda
- Karung anyaman PP netto 25 kg — dicetak dengan merek PZTRAFFIC atau merek Anda sendiri: pencetakan karung OEM dipersilakan.
- Pengantongan otomatis dan penyusunan palet robotik pada lini termoplastik di fasilitas Hezhou kami.
- Setiap batch lolos laboratorium internal sebelum ditumpuk untuk pemuatan.
- Dikirim dari Pelabuhan Qinzhou — Asia Tenggara dalam 5–15 hari, Afrika dan Amerika rata-rata ~30 hari. Ketentuan perdagangan EXW / FOB / CIF.
- Dokumentasi FORM E / ACFTA tersedia bagi pembeli ASEAN.
Dipasangkan Dengan
Pertanyaan Pembelian
Q-01Can you provide samples?
Yes — free samples of 1–2 kg for any product. Whatever you pay for the sample and its freight is credited in full against your next purchase. Email info@pztraffic.com with the products and standards you need.
Q-02My tender asks for values that are not in BS 3262 — a higher softening point, a TiO₂ minimum, an RL target. Can you match them?
Yes. Clauses like softening point ≥ 95°C, TiO₂ ≥ 10% or an initial RL figure are project add-ons, not part of the standard’s original text — so they must be stated explicitly. Send us the tender clause and we formulate against it, answering with a datasheet that covers every line.
Q-03Do you supply the glass beads as well?
Yes, both forms. Premix beads can be built into the material at the plant — our 20% mixed glass beads variant matches the standard’s reflectorized formulation — and drop-on beads (BS 6088B, AASHTO M247 types) ship alongside the paint in the same container.
Q-04Which trade terms do you support?
We can provide EXW, FOB, CIF services, etc.
Dapatkan Penawaran Harga dalam 24 Jam
Silakan isi formulir di bawah ini dan kami akan menghubungi Anda.
