Cat Penanda Jalan Termoplastik BS 3262
Bahan penanda termoplastik sapuan panas yang dihasilkan dalam rangka formulasi BS 3262 — piawaian yang paling kerap dirujuk dalam tender berpengaruh UK di seluruh Afrika, Timur Tengah dan Asia Tenggara. Tersedia dalam warna putih dan kuning, dilaraskan baris demi baris mengikut klausa tender anda, dengan helaian data dan sampel percuma sebelum anda membuat komitmen.
- NAMA PRODUKCat penanda jalan termoplastik
- PEMBUNGKUSAN25 kg / beg
- KOMPOSISI UTAMAManik kaca ≥ 20% · 10% TiO₂ (putih) · Pengikat resin petroleum C5 ≥ 18%
- JUGA DIKENALI SEBAGAICat penanda jalan leburan panas · cat garisan jalan sapuan panas · sebatian penanda turapan termoplastik
- TEMPAT ASALGuangxi, China
- APLIKASILeburan panas (dicairkan dan digunakan di tapak)
- BENTUKSerbuk
- MASA PENGERINGANPurata 2–5 minit
Keperluan BS 3262
BS 3262 ialah set tiga bahagian, dua daripadanya telah ditarik balik pada tahun 2000 — projek moden biasanya menggabungkan rangka formulasinya dengan klausa prestasi EN, dan kami memformulasikan untuk kedua-duanya. Jadual di bawah memetik keperluan teks asal.
Formulation — BS 3262-1:1989
| Composition (% of total mixture) | Requirement |
|---|---|
| Binder (resin + oil) | 20 ± 2% |
| Premixed solid glass beads (when reflectorized) | ≥ 20% |
| Aggregate + pigment + filler + premix beads, combined | 80 ± 2% |
The premix beads sit inside the 80 ± 2% total. White pigment must be anatase or rutile titanium dioxide to BS 1851 — the standard fixes the type, not a minimum content. The combined solids must pass a 2.80 mm sieve completely, with 65–95% passing 600 µm.
Finished-material requirements
| Property | White | Yellow |
|---|---|---|
| Softening point | ≥ 65°C | ≥ 65°C |
| Luminance factor, as manufactured | ≥ 70 | ≥ 50 |
| Luminance factor, remelted on site | ≥ 65 | ≥ 45 |
| Luminance factor after heat-stability test | ≥ 65 | ≥ 45 |
| Flow resistance (mean slump) | ≤ 25% | ≤ 25% |
| Laboratory skid resistance (pendulum) | ≥ 45 | ≥ 45 |
The heat-stability test stirs the material for six hours at 200°C or the declared maximum application temperature, whichever is lower. Luminance factor is a daytime whiteness figure — it is not the night-time retroreflectivity (RL) of EN 1436; if your tender sets an RL target, specify it separately and we formulate for it.
Application — BS 3262-3, still in force
| Binder system | Method | Thickness (excl. drop-on beads) |
|---|---|---|
| Synthetic resin | Screed | 2.0 – 5.0 mm |
| Spray (except yellow edge lines) | ≥ 1.5 mm | |
| Extrusion | 2.5 – 3.5 mm | |
| Gum / wood rosin | Screed | 3.0 – 5.0 mm |
| Spray (except yellow edge lines) | ≥ 2.0 mm | |
| Extrusion | 4.0 – 5.0 mm |
Lay on a dry surface above 5°C; concrete and polished-aggregate asphalt need a compatible primer. Line width tolerance is +10% / −5% of the specified width.
Apa yang sebenarnya diperlukan oleh BS 3262 — dan apa yang tidak
TUJUH KLAUSA YANG LAZIM DALAM TENDER TIDAK TERDAPAT DALAM TEKS PIAWAIAN. JURUTERA KAMI MENGHURAIKAN TEKS ASAL, JADUAL DEMI JADUAL.
Dari Talian Kami Ke Pelabuhan Anda
- Beg tenun PP berat bersih 25 kg — dicetak dengan jenama PZTRAFFIC atau jenama anda; cetakan beg OEM dialu-alukan.
- Pengisian beg automatik dan penyusunan palet dengan robot pada talian termoplastik di tapak Hezhou kami.
- Setiap kelompok lulus ujian makmal dalaman sebelum disusun untuk pemuatan.
- Dihantar dari Pelabuhan Qinzhou — Asia Tenggara dalam 5–15 hari, Afrika dan benua Amerika secara purata ~30 hari. Terma perdagangan EXW / FOB / CIF.
- Dokumentasi FORM E / ACFTA tersedia untuk pembeli ASEAN.
Dipadankan Dengan
Soalan Pembelian
Q-01Can you provide samples?
Yes — free samples of 1–2 kg for any product. Whatever you pay for the sample and its freight is credited in full against your next purchase. Email info@pztraffic.com with the products and standards you need.
Q-02My tender asks for values that are not in BS 3262 — a higher softening point, a TiO₂ minimum, an RL target. Can you match them?
Yes. Clauses like softening point ≥ 95°C, TiO₂ ≥ 10% or an initial RL figure are project add-ons, not part of the standard’s original text — so they must be stated explicitly. Send us the tender clause and we formulate against it, answering with a datasheet that covers every line.
Q-03Do you supply the glass beads as well?
Yes, both forms. Premix beads can be built into the material at the plant — our 20% mixed glass beads variant matches the standard’s reflectorized formulation — and drop-on beads (BS 6088B, AASHTO M247 types) ship alongside the paint in the same container.
Q-04Which trade terms do you support?
We can provide EXW, FOB, CIF services, etc.
Dapatkan Sebut Harga Dalam 24 Jam
Sila isi borang di bawah dan kami akan menghubungi anda.
