Rangi ya Thermoplastiki ya Alama za Barabarani ya BS 3262
Nyenzo ya thermoplastiki ya alama inayowekwa kwa joto na kutengenezwa chini ya mfumo wa fomula wa BS 3262 — kiwango kinachotajwa sana katika zabuni zenye ushawishi wa Uingereza barani Afrika, Mashariki ya Kati na Asia ya Kusini-Mashariki. Inapatikana nyeupe na njano, ikirekebishwa kifungu kwa kifungu kulingana na zabuni yako, pamoja na karatasi ya data na sampuli za bure kabla hujaweka ahadi.
- JINA LA BIDHAARangi ya thermoplastiki ya alama za barabarani
- UFUNGASHAJI25 kg / gunia
- MUUNDO MKUUShanga za kioo ≥ 20% · 10% TiO₂ (nyeupe) · kiunganishi cha resini ya petroli ya C5 ≥ 18%
- PIA HUITWARangi ya kuyeyushwa kwa joto ya alama za barabarani · rangi ya mistari ya barabara inayowekwa kwa joto · mchanganyiko wa thermoplastiki wa alama za lami
- MAHALI ILIPOTOKAGuangxi, China
- MATUMIZIKuyeyushwa kwa joto (inayeyushwa na kuwekwa eneo la kazi)
- HALIPoda
- MUDA WA KUKAUKADakika 2–5 kwa wastani
Mahitaji ya BS 3262
BS 3262 ni mkusanyiko wa sehemu tatu, mbili kati yake ziliondolewa mwaka 2000 — miradi ya kisasa kwa kawaida huunganisha mfumo wake wa fomula na vifungu vya utendaji vya EN, nasi tunatengeneza fomula kwa yote mawili. Majedwali yaliyo hapa chini yananukuu mahitaji ya maandishi asilia.
Formulation — BS 3262-1:1989
| Composition (% of total mixture) | Requirement |
|---|---|
| Binder (resin + oil) | 20 ± 2% |
| Premixed solid glass beads (when reflectorized) | ≥ 20% |
| Aggregate + pigment + filler + premix beads, combined | 80 ± 2% |
The premix beads sit inside the 80 ± 2% total. White pigment must be anatase or rutile titanium dioxide to BS 1851 — the standard fixes the type, not a minimum content. The combined solids must pass a 2.80 mm sieve completely, with 65–95% passing 600 µm.
Finished-material requirements
| Property | White | Yellow |
|---|---|---|
| Softening point | ≥ 65°C | ≥ 65°C |
| Luminance factor, as manufactured | ≥ 70 | ≥ 50 |
| Luminance factor, remelted on site | ≥ 65 | ≥ 45 |
| Luminance factor after heat-stability test | ≥ 65 | ≥ 45 |
| Flow resistance (mean slump) | ≤ 25% | ≤ 25% |
| Laboratory skid resistance (pendulum) | ≥ 45 | ≥ 45 |
The heat-stability test stirs the material for six hours at 200°C or the declared maximum application temperature, whichever is lower. Luminance factor is a daytime whiteness figure — it is not the night-time retroreflectivity (RL) of EN 1436; if your tender sets an RL target, specify it separately and we formulate for it.
Application — BS 3262-3, still in force
| Binder system | Method | Thickness (excl. drop-on beads) |
|---|---|---|
| Synthetic resin | Screed | 2.0 – 5.0 mm |
| Spray (except yellow edge lines) | ≥ 1.5 mm | |
| Extrusion | 2.5 – 3.5 mm | |
| Gum / wood rosin | Screed | 3.0 – 5.0 mm |
| Spray (except yellow edge lines) | ≥ 2.0 mm | |
| Extrusion | 4.0 – 5.0 mm |
Lay on a dry surface above 5°C; concrete and polished-aggregate asphalt need a compatible primer. Line width tolerance is +10% / −5% of the specified width.
Kile ambacho BS 3262 inahitaji hasa — na kile ambacho haihitaji
VIFUNGU SABA VINAVYOTUMIKA SANA KWENYE ZABUNI HAVIMO KWENYE MAANDISHI YA KIWANGO. WAHANDISI WETU WANACHAMBUA MAANDISHI ASILIA, JEDWALI KWA JEDWALI.
Kutoka Mstari Wetu hadi Bandari Yako
- Magunia ya PP yaliyofumwa yenye uzito halisi wa 25 kg — yamechapishwa kwa chapa ya PZTRAFFIC au chapa yako mwenyewe: uchapishaji wa magunia ya OEM unakaribishwa.
- Ufungaji wa kiotomatiki na upangaji kwenye paleti kwa roboti kwenye mistari ya thermoplastiki katika kituo chetu cha Hezhou.
- Kila bechi hupitishwa na maabara yetu ya ndani kabla ya kupangwa kwa ajili ya kupakiwa.
- Husafirishwa kutoka Bandari ya Qinzhou — Asia ya Kusini-Mashariki kwa siku 5–15, Afrika na Amerika kwa wastani wa siku ~30. Masharti ya biashara ya EXW / FOB / CIF.
- Nyaraka za FORM E / ACFTA zinapatikana kwa wanunuzi wa ASEAN.
Inaoana na
Maswali ya Ununuzi
Q-01Can you provide samples?
Yes — free samples of 1–2 kg for any product. Whatever you pay for the sample and its freight is credited in full against your next purchase. Email info@pztraffic.com with the products and standards you need.
Q-02My tender asks for values that are not in BS 3262 — a higher softening point, a TiO₂ minimum, an RL target. Can you match them?
Yes. Clauses like softening point ≥ 95°C, TiO₂ ≥ 10% or an initial RL figure are project add-ons, not part of the standard’s original text — so they must be stated explicitly. Send us the tender clause and we formulate against it, answering with a datasheet that covers every line.
Q-03Do you supply the glass beads as well?
Yes, both forms. Premix beads can be built into the material at the plant — our 20% mixed glass beads variant matches the standard’s reflectorized formulation — and drop-on beads (BS 6088B, AASHTO M247 types) ship alongside the paint in the same container.
Q-04Which trade terms do you support?
We can provide EXW, FOB, CIF services, etc.
Pata Nukuu ya Bei ndani ya Saa 24
Tafadhali jaza fomu iliyo hapa chini nasi tutawasiliana nawe.
